Logotipo Texsa, S.A.

TECSOUND®

TECSOUND® is a high density polymer-based, asphalt-free, synthetic soundproofing membrane, that offers good acoustic insulation in different building elements. It is equipped with a tissue non-tissue polypropylene fleece on its upper side to improve the tear strength of the membrane and at the same time offer a protection or a finishing.

Technical documentation

  • Logo Facebook
  • Logo Twitter
  • Logo Linkedin
  • Advantages
  • Application
  • Installation
  • Storage
  • Regulations
• High acoustic insulation, combined with soft, flexible elements.
• High sound damping capacity on metal surfaces.
• Flexible.
• Easy to handle and adaptable to uneven surfaces.
• Easy to cut with a knife or scissors
• Good bonding to most of the types of surfaces.
• Acts as a vapour control layer
• Cold- and heat-resistance.
• Excellent ageing resistance.
• Rotproof.
• Soundproofing against airborne noise in ceilings and lightweight roofs.
• Reduction of impact noise level in all types of floors, sandwiched between floor slabs and loose-laid flooring.
• Damping of impact noise caused by atmospheric agents on metal decks.
• Soundproofing of air conditioning ducts and pipes.
• Combined with sound-absorbent materials, it offers products with high acoustic performance.
• Its applications in the industrial field cover from the soundproofing of booths to the acoustic insulation of machine-rooms, gutter pipes, sound-damping of metal sheets, etc.
Substrate: TECSOUND lends itself to all types of normal building substrates (renderings, gypsum board, metal, DM, plastic materials). The substrate must be even, smooth, clean and dry. It must also be free from elements that could damage the membrane. If the rendering is old, its condition must be checked to avoid adherence problems of the TECSOUND sheet to the rendering.
Installation of the membrane: prior to installing the membrane, an adhesive must be applied to both substrate and membrane, and left to dry according to the instructions of the adhesive manufacturer before bonding the two surfaces. Pressure must be exerted on all the points to ensure correct adherence.
It could be installed mechanically fastened. The number of fixings will depend on the product, the support and the system where the membrane will be applied.
Installation of the membrane on metal decks: Extend the roll over the substrate progressively, trying to keep the fleece remained on the upper side so it protects the membrane. The membrane must be applied in such a way that the length of the roll is perpendicular to the direction of the deck profile. The membrane must be made to follow the profile of the metal support at all times, ensuring that there is no formation of air pockets. The thermal insulation boards are then installed, mechanically fastened.
Laps: Overlap 5 cm both vertically and horizontally. Care must be taken to always seal the laps correctly, as small openings can reduce the level of acoustic insulation required.
Yield: 1 m2 of membrane covers approximately 0.90 m2 of surface area, including overlaps.
Tecsound® 35
Roll:8 m. x 1,22 m
Pallet:24 rolls (234,24 m²)
Tecsound® 50
Roll:6 m. x 1,22 m
Pallet:24 rolls (175,68 m²)
Tecsound® 70
Roll:5 m. x 1,22 m
Pallet:24 rolls (146,4 m²)
Tecsound® 100
Roll:4 m. x 1,20 m
Pallet:1 m. x 1,20 m. sheet (*)
21 rolls (100,8 m²)
75 sheets (90 m²)
· In accordance with the following norms: CTE-DB-HR, EN ISO 140-1, EN ISO 140-3, EN ISO 140-6, EN ISO 140-8, EN 20140-2 and EN ISO 717/1/2.
· Quality System in accordance with ISO:9001

Related Products

You TubeLinkedin

 

DATA PROTECTION

 

In cases where the user must provide data of a personal nature to TEXSA SYSTEMS SLU to use any of the Web services, the former will be expressly informed each time of the existence of an automated data base, the aim of same, those receiving the information and identity and address of the person responsible for data treatment, all with the aim of complying with that stipulated in Organic Law 15/1999 of 13th December, for the Protection of Data of a Personal Nature. To this effect, TEXSA SYSTEMS SLU shall reserve confidentiality of the data obtained and the users can exercise all rights to access, amendment, cancellation and any others referred to in aforementioned Organic Law 15/1999.

TEXSA SYSTEMS SLU has adopted all the necessary measures of a technical and organisational nature, to guarantee the security of the data of a personal nature, with the aim of preventing their alteration, loss, treatment or unauthorised access, in accordance with the requirements and conditions called for by Royal Decree 994/1999 of 11th June, in which the Regulation of safety measures of automated files containing data of a personal nature, is passed, notwithstanding the user's acceptance and knowledge that to date totally impregnable safety measures do not exist.

In case of doubt or the need to extend the information covering any of the above items, please do not hesitate to contact TEXSA SYSTEMS SLU.

 

TEXSA SYSTEMS SLU.
C/Ferro Nº7,
Polígono Industrial Can Pelegrí,
Castellbisbal
08755, Barcelona - Spain
NIF B66067687

Tel. (+34) 93 635 14 00
Fax (+34) 93 635 14 80

Email:  lo...@texsa.com

You TubeLinkedin