Logotipo Texsa, S.A.


MORTERPLAS PARKING Membrane with polyester felt (FP) reinforcement finished with non-woven polyester felt on the upper side and thermally bonded film on the bottom side.

Technical documentation

  • Logo Facebook
  • Logo Twitter
  • Logo Linkedin
  • Advantages
  • Application
  • Installation
  • Storage
  • Regulations
The polyester felt confer the best mechanical properties
to the membrane:
· High tear resistance
· High puncturing resistance (static and dynamic)
· High resistance to heavy traffic and asphalt-spreading machinery
• Resistance to the high temperature of asphaltic agglomerate, as the melting point of the non-woven polyester is over 200º C
• The polyester on the upper side of the membrane allows for concrete to be poured directly on top of it
• Great adherence to the support and to the asphaltic agglomerate
• Great dimensional stability.
· It is especially recommended in applications where a robust membrane with high temperature resistance is needed and maximum machine performance is available.
· Waterproofing of bridge decks on railway structures, with concrete protection, with asphaltic agglomerate, with prior asphalt irrigation on the membrane or ballast.
· Waterproofing of bridge decks for vehicle traffic, with concrete protection, with asphaltic agglomerate, with prior asphalt irrigation on the membrane.
· Waterproofing of double-layer car park roofs as the top layer.
· Waterproofing of underground structures like foundation slabs and flooring, in adhered or floating systems.
· It can be applied in single or double-layer systems according to application and use.

Parking roofs in single and double-layer systems. Flooring and underground structures.
· SUPPORT: The surface must be dry, firm, even, clean and free of loose materials.
· It can be applied completely adhered, partially adhered or floating. · To adhere the membrane to the support, the support is primed with EMUFAL I. Once dry, use flame to adhere the membrane.
· For supports with a coarseness greater than or equal to 1.5, the adhesive system in the double-layer membrane involving the Adhesive P extension is cold application, as is the MORTERPLAS SBS FV 2.4kg GR2 bottom membrane, in systems that comply with DIT No. 579/11 MORTERPLAS VEHICULAR TRAFFIC.
· The flame is applied as uniformly as possible (the greater the heat, the greater the retraction) along the width of the membrane without reaching the overlap, which will be done later, since it is important that the temperature be the same in every area. The flame should be applied until the anti-adherent film pore opens.
· The membranes are installed in such a way that no more than three membranes overlap at the same point.
· Overlaps are flame-bonded, with a minimum longitudinal overlap of 8 cm and a minimum transversal overlap of 10 cm, first eliminating the polyester felt from the surface with flame and with the help of a trowel to ensure mastic adherence.
· In the two-layer solution, the top membrane must be completely adhered to the bottom membrane, and it must be placed in the same direction so that the overlap lays approximately in the middle of the bottom membrane.
· Installation and measurements will be conducted in accordance with regulations of the UNE 104401 standard.
Roll: 1 m x 8 m
Pallet: 200 m²
· In accordance with the EN 13707, EN 14695 and EN 13969-T standards. Certified with CE marking No. 0099/CPR/A85/0087
· Voluntary certification of the product with AENOR seal according to the same European standard.
· Quality System in accordance with ISO:9001




In cases where the user must provide data of a personal nature to TEXSA SYSTEMS SLU to use any of the Web services, the former will be expressly informed each time of the existence of an automated data base, the aim of same, those receiving the information and identity and address of the person responsible for data treatment, all with the aim of complying with that stipulated in Organic Law 15/1999 of 13th December, for the Protection of Data of a Personal Nature. To this effect, TEXSA SYSTEMS SLU shall reserve confidentiality of the data obtained and the users can exercise all rights to access, amendment, cancellation and any others referred to in aforementioned Organic Law 15/1999.

TEXSA SYSTEMS SLU has adopted all the necessary measures of a technical and organisational nature, to guarantee the security of the data of a personal nature, with the aim of preventing their alteration, loss, treatment or unauthorised access, in accordance with the requirements and conditions called for by Royal Decree 994/1999 of 11th June, in which the Regulation of safety measures of automated files containing data of a personal nature, is passed, notwithstanding the user's acceptance and knowledge that to date totally impregnable safety measures do not exist.

In case of doubt or the need to extend the information covering any of the above items, please do not hesitate to contact TEXSA SYSTEMS SLU.


C/Ferro Nº7,
Polígono Industrial Can Pelegrí,
08755, Barcelona - Spain
NIF B66067687

Tel. (+34) 93 635 14 00
Fax (+34) 93 635 14 80

Email:  lopd@texsa.com