Logotipo Texsa, S.A.

VINITEX MP

VINITEX MP is a PVC-P synthetic membrane reinforce with polyester mesh.

Technical documentation

  • Logo Facebook
  • Logo Twitter
  • Logo Linkedin
  • Advantages
  • Application
  • Installation
  • Storage
  • Regulations
· Resistant to wind stress
· Weatherproof and UV resistance.
· Good Ageing resistance.
· Highly puncturing resistance.
· Weathered resistance.
· Excellent mechanical properties.
· Easily Hot-air weldable, even several years after installation.
· Excellent flexibility at low temperatures.
· RAL colouring available on request for landscape or architectural purpose.
VINITEX MP is used for roof waterproofing, specially for mechanically fastened systems in flat or pitched roofs in new roof or re-roofing.
· Installation of Vinitex System must be performed by qualified or authorized applicator
· Substrates must be smooth, clean, and free of sharp edges or foreign substances. In contact to asphalt, bitumen, oils or existing membranes, a separation layer must be required.
· Membranes should be joined using hot air welding. Check the joint using a round-headed punch.
· Good Weldability depends on environmental conditions, equipment conditions (temperature, pressure, speed of work) and surface of the membrane, so the equipment should be adjusted to get a right welding.
Roll: 1,05m x 25m x 1,2mm
Pallet: 28 Rolls / 735m²

Roll: 1,60m x 20m x 1,2mm
Pallet: 23 Rolls / 736m²

Roll: 2,10m x 20m x 1,2mm
Pallet: 14 Rolls / 735m²

Roll: 1,05m x 20m x 1,5mm
Pallet: 28 Rolls / 588m²

Roll: 1,60m x 20m x 1,5mm
Pallet: 23 Rolls / 736m²

Roll: 2,10m x 20m x 1,5mm
Pallet: 14 Rolls / 588m²

Roll: 1,05m x 20m x 1,8mm
Pallet: 28 Rolls / 588m²

Roll: 1,60m x 20m x 1,8mm
Pallet: 23 Rolls / 736m²

Roll: 2,10m x 20m x 1,8mm
Pallet: 14 Rolls / 588m²

Roll: 1,05m x 20m x 2,0mm
Pallet: 28 Rolls / 588m²

Roll: 1,60m x 20m x 2,0mm
Pallet: 18 Rolls / 576m²

Roll: 2,10m x 20m x 2,0mm
Pallet: 14 Rolls / 588m²
· Produced under European Standard EN 13956. Certificate CE nº 1085/CPR/0261.
· Certificated by BBA (British Board Agreement) nº 11/4875.
· Manufactured by coextrusion or cast process in a plant certified ISO 9001 and ISO 14001.

 

DATA PROTECTION

 

In cases where the user must provide data of a personal nature to TEXSA SYSTEMS SLU to use any of the Web services, the former will be expressly informed each time of the existence of an automated data base, the aim of same, those receiving the information and identity and address of the person responsible for data treatment, all with the aim of complying with that stipulated in Organic Law 15/1999 of 13th December, for the Protection of Data of a Personal Nature. To this effect, TEXSA SYSTEMS SLU shall reserve confidentiality of the data obtained and the users can exercise all rights to access, amendment, cancellation and any others referred to in aforementioned Organic Law 15/1999.

TEXSA SYSTEMS SLU has adopted all the necessary measures of a technical and organisational nature, to guarantee the security of the data of a personal nature, with the aim of preventing their alteration, loss, treatment or unauthorised access, in accordance with the requirements and conditions called for by Royal Decree 994/1999 of 11th June, in which the Regulation of safety measures of automated files containing data of a personal nature, is passed, notwithstanding the user's acceptance and knowledge that to date totally impregnable safety measures do not exist.

In case of doubt or the need to extend the information covering any of the above items, please do not hesitate to contact TEXSA SYSTEMS SLU.

 

TEXSA SYSTEMS SLU.
C/Ferro Nº7,
Polígono Industrial Can Pelegrí,
Castellbisbal
08755, Barcelona - Spain
NIF B66067687

Tel. (+34) 93 635 14 00
Fax (+34) 93 635 14 80

Email:  lopd@texsa.com