Logotipo Texsa, S.A.

PRODUCTS

  • XPS CB

    Extruded polystyrene XPS is the ideal product for the insulation of walls. XPS CB is the recommended product to be used in front of beams and pillars to prevent thermal bridges and possible condensation. Its planed and grooved...

  • XPS CR

    Extruded polystyrene XPS is the ideal product for the insulation of roofs. In pitched roof applications where the insulation boards do not support the tile weight, XPS CR is used. In these type of roofs timber battens are...

  • XPS CW

    Extruded polystyrene XPS is the ideal product for the insulation of walls. XPS CW is a long board (2.6m) and has a tongued and grooved profile so that the boards interlock when being placed vertically on the wall.

  • XPS PM

    Extruded polystyrene XPS is the ideal product for the insulation of walls. XPS PM is a shorter board (1.25m) which allows a better manipulation in those zones where access is more difficult. This product has a tongued and...

  • XPS SL

    Extruded polystyrene XPS is the ideal product for the insulation of roofs. In the case of inverted flat roofs the recommended product is XPS SL which is placed on top of the waterproof layer. Apart from being and energy efficient...

  • XPS TR

    Extruded polystyrene XPS is the ideal product for the insulation of roofs. In pitched roof applications, where the insulation goes directly below the tiles, the recommended product is XPS TR. This product has got a grooved...

  • XPS 300 G-T

    Extruded polystyrene XPS is the ideal product for the insulation of floors. For the majority of construction solutions, the recommended product is XPS 300 which has a lap joint edge profile to facilitate its placement on...

  • XPS 500

    Extruded polystyrene XPS is the ideal product for the insulation of floors. For frames and floors which are subject to heavy loads such as garages and warehouses with heavy passing traffic, the most suitable product is XPS...

You TubeLinkedin

 

DATA PROTECTION

 

In cases where the user must provide data of a personal nature to TEXSA SYSTEMS SLU to use any of the Web services, the former will be expressly informed each time of the existence of an automated data base, the aim of same, those receiving the information and identity and address of the person responsible for data treatment, all with the aim of complying with that stipulated in Organic Law 15/1999 of 13th December, for the Protection of Data of a Personal Nature. To this effect, TEXSA SYSTEMS SLU shall reserve confidentiality of the data obtained and the users can exercise all rights to access, amendment, cancellation and any others referred to in aforementioned Organic Law 15/1999.

TEXSA SYSTEMS SLU has adopted all the necessary measures of a technical and organisational nature, to guarantee the security of the data of a personal nature, with the aim of preventing their alteration, loss, treatment or unauthorised access, in accordance with the requirements and conditions called for by Royal Decree 994/1999 of 11th June, in which the Regulation of safety measures of automated files containing data of a personal nature, is passed, notwithstanding the user's acceptance and knowledge that to date totally impregnable safety measures do not exist.

In case of doubt or the need to extend the information covering any of the above items, please do not hesitate to contact TEXSA SYSTEMS SLU.

 

TEXSA SYSTEMS SLU.
C/Ferro Nº7,
Polígono Industrial Can Pelegrí,
Castellbisbal
08755, Barcelona - Spain
NIF B66067687

Tel. (+34) 93 635 14 00
Fax (+34) 93 635 14 80

Email:  lo...@texsa.com

You TubeLinkedin