Logotipo Texsa, S.A.

PRODUCTS

  • MORTERPLAS PARKING

    MORTERPLAS PARKING Membrane with polyester felt (FP) reinforcement finished with non-woven polyester felt on the upper side and thermally bonded film on the bottom side.

  • MORTERPLAS SBS ALU 3 KG

    MORTERPLAS SBS ALU 3KG is a self-protected waterproofing membrane, made of SBS elastomeric bitumen, without reinforcement and finished with 0.08 mm embossed aluminium on the upper side and a thermally bonded film on the lower...

  • MORTERPLAS SBS FM 3 KG

    MORTERPLAS SBS FM 3 Kg is a waterproofing membrane, made of SBS elastomeric bitumen, reinforced with polyester felt (FP), and finished with a thermally bonded film on both the upper and lower side.

  • MORTERPLAS SBS FM 5 KG MIN

    MORTERPLAS SBS FM 5 Kg MINERAL is a self-protected waterproofing membrane, made of SBS elastomeric bitumen, reinforced with polyester and fibre glass mesh (FM), and finished with a mineral protection on the upper side and...

  • MORTERPLAS SBS FP 4 KG

    MORTERPLAS SBS FP 4 KG is a waterproofing membrane that is not self-protected, made of SBS elastomeric bitumen, reinforced with high density polyester felt (FP), and finished with a thermally bonded film on both the upper...

  • MORTERPLAS SBS FP 4,8 KG

    MORTERPLAS SBS FP 4KG is a waterproofing membrane that is not self-protected, made of SBS elastomeric bitumen, reinforced with high density polyester felt (FP), and finished with a thermally bonded film on both the upper...

  • MORTERPLAS SBS FP-S 4,8 KG

    MORTERPLAS SBS FP-S 4,8 KG is an SBS elastomeric bitumen-based waterproofing membrane, with high weight polyester felt (FP) reinforcement, and finished on both sides with thermofusible film.

  • MORTERPLAS SBS FP-T 6 KG MIN

    MORTERPLAS SBS FP-T 6 Kg MINERAL is a self-protected membrane, made of SBS elastomeric bitumen, reinforced with high density polyester felt (FP), and finished with a mineral protection on the upper side and a thermally bonded...

  • MORTERPLAS SBS FPV 4 KG MIN

    MORTERPLAS SBS FPV MIN 4 KG is a self-protected waterproofing membrane, made of SBS elastomeric bitumen, reinforced with reinforced and stabilized polyester felt (FP), and finished with a mineral protection on the upper side...

  • MORTERPLAS SBS FPV 5 KG MIN

    MORTERPLAS SBS FPV MIN 5KG: it is a self-protected waterproofing membrane, made of SBS elastomeric bitumen, reinforced with reinforced and stabilized polyester felt (FP), and finished with a mineral protection on the upper...

  • MORTERPLAS SBS FPV-S 5 KG MIN

    MORTERPLAS SBS FPV-S MIN is a self-protected, elastomeric SBS bitumen-based waterproofing membrane reinforced with high grammage polyester felt (FP), mineral finish on the upper side and thermofusible film on the undersi...

  • MORTERPLAS SBS FV 2,4 KG GR-2

    MORTERPLAS SBS FV is a non-self-protected membrane, made of SBS elastomeric bitumen, reinforced with fibre glass felt (FV), and finished with a thermally bonded or non-stick film with sand on both the upper and lower side.
    Membrane...

  • MORTERPLAS SBS FV 3 KG

    MORTERPLAS SBS FV is a non-self-protected membrane, made of SBS elastomeric bitumen, reinforced with fibre glass felt (FV), and finished with a thermally bonded or non-stick film with sand on both the upper and lower sid...

  • MORTERPLAS SBS FV 4 KG

    MORTERPLAS SBS FV is a non-self-protected membrane, made of SBS elastomeric bitumen, reinforced with fibre glass felt (FV), and finished with a thermally bonded or non-stick film with sand on both the upper and lower sid...

  • MORTERPLAS SBS FV 4 KG MIN

    MORTERPLAS SBS FV MIN is a self-protected waterproofing membrane, made of SBS elastomeric bitumen, reinforced with fibre glass felt (FV), and finished with a mineral protection on the upper side and a thermally bonded film...

  • TEXSELF 1,5

    TEXSELF 1.5 is a self-adhesive, elastomeric mastic (SBS) waterproofing membrane, with a high mechanical performance polyethylene film finish on the upper side and an easily removable silicone film on the lower side.

  • TEXSELF AL Natural 1,5mm

    TEXSELF AL NATURAL 1.5 mm is a self-adhesive
    waterproofing membrane made up of an elastomeric
    mastic (SBS), with an embossed “orange peel” aluminium foil finish on the upper side and an easily removable silicone film...

  • TEXSELF Capa Base

    TEXSELF Base Sheet has a fibre glass felt (FV)
    reinforcement, coated on the upper side with a
    polyethylene film and on the bottom side an easily
    removable silicone film.

  • TEXSELF Capa Superior

    TEXSELF Cap Sheet has a composite polyester felt
    (FP) reinforcement coated on the upper side with black mineral slate granules and on the bottom side an easily removable silicone film

  • TEXSELF FV 2C

    TEXSELF FV 2C is a double-sided self-adhesive
    elastomeric waterproofing membrane, with a fibre glass reinforcement and an easily removable silicone film on both sides.

12>
Records from 1 to 20 of 24
You TubeLinkedin

 

DATA PROTECTION

 

In cases where the user must provide data of a personal nature to TEXSA SYSTEMS SLU to use any of the Web services, the former will be expressly informed each time of the existence of an automated data base, the aim of same, those receiving the information and identity and address of the person responsible for data treatment, all with the aim of complying with that stipulated in Organic Law 15/1999 of 13th December, for the Protection of Data of a Personal Nature. To this effect, TEXSA SYSTEMS SLU shall reserve confidentiality of the data obtained and the users can exercise all rights to access, amendment, cancellation and any others referred to in aforementioned Organic Law 15/1999.

TEXSA SYSTEMS SLU has adopted all the necessary measures of a technical and organisational nature, to guarantee the security of the data of a personal nature, with the aim of preventing their alteration, loss, treatment or unauthorised access, in accordance with the requirements and conditions called for by Royal Decree 994/1999 of 11th June, in which the Regulation of safety measures of automated files containing data of a personal nature, is passed, notwithstanding the user's acceptance and knowledge that to date totally impregnable safety measures do not exist.

In case of doubt or the need to extend the information covering any of the above items, please do not hesitate to contact TEXSA SYSTEMS SLU.

 

TEXSA SYSTEMS SLU.
C/Ferro Nº7,
Polígono Industrial Can Pelegrí,
Castellbisbal
08755, Barcelona - Spain
NIF B66067687

Tel. (+34) 93 635 14 00
Fax (+34) 93 635 14 80

Email:  lo...@texsa.com

You TubeLinkedin